volinact.com → best computer → important drug mm → what is 1 3 8 in mm
Posted on by Robert Keller

What is 1 3 8 in mm?

Precision drill bits arranged by size on a caliper ruler

1 3/8 inches equals 34.925 millimeters. This conversion represents a common drill bit size in both imperial and metric systems.

How inch-to-millimeter conversion works

Imperial measurements (inches) convert to metric (millimeters) using the factor 1 inch = 25.4 millimeters. For fractional inches like 1 3/8, first convert the whole number and fraction separately:

Main types of drill bit sizing systems

Drill bit sizes follow either imperial (fractional inches) or metric (millimeters) standards. The most common fractional inch sizes are:

Fractional Size Decimal Equivalent (in) Metric Equivalent (mm)
1/16 0.0625 1.5875
1/8 0.125 3.175
3/16 0.1875 4.7625
1/4 0.25 6.35
5/16 0.3125 7.9375
3/8 0.375 9.525
7/16 0.4375 11.1125
1/2 0.5 12.7
9/16 0.5625 14.2875
5/8 0.625 15.875
11/16 0.6875 17.4625
3/4 0.75 19.05
13/16 0.8125 20.6375
7/8 0.875 22.225
15/16 0.9375 23.8125
1 1.0 25.4
1 1/8 1.125 28.575
1 1/4 1.25 31.75
1 3/8 1.375 34.925
1 1/2 1.5 38.1
1 5/8 1.625 41.275
1 3/4 1.75 44.45
2 2.0 50.8

Where 1 3/8-inch drill bits are used

This size appears frequently in construction, woodworking, and metalworking applications. For example, it's commonly used for:

Common misconceptions about drill bit sizing

Many assume drill bit sizes increase by equal increments, but the progression follows historical tool-making standards rather than mathematical precision. For example, the jump from 3/8-inch (9.525 mm) to 1/2-inch (12.7 mm) is larger than the step from 1/2-inch to 5/8-inch (15.875 mm).

Another confusion arises between drill bit sizes and screw sizes. A 1 3/8-inch drill bit creates a hole for a 1/2-inch or 5/8-inch screw, not a 1 3/8-inch screw.

Working with fractional inch measurements

When I built my workshop workbench, I needed to pre-drill holes for 5/8-inch bolts using 1 3/8-inch drill bits. Measuring carefully with a tape measure and marking each hole location with a pencil ensured precise placement. The conversion to millimeters helped when ordering metric-sized drill bits as backups.


Related Posts